All You Need to Know About Plotter Blades

Once you are working with a vinyl plotter then it is important that you have an efficient one. It is choosing the right plotter blade that you need to do for you to achieve this one. The angle of the blade is one of the things that you need to consider. The angle of the blade should be changed depending on the media that you are working. Once it is its one is what you will be doing then it is the one that can help optimize the quality of the cut. Every manufacturer will have varying angles when it comes to their blades. The most common ones that you can see on the market are the 30, 45 and 60-degree angles.

The sharpest angle and has more cutting surface on the blade is the 60 degrees type. This one is being utilized for thicker materials. You need to choose a blade with an angle that is able to cut through the material and adhesive. Preventing vinyl ears causing a poor quality cut is what you are able to do once you will be choosing a blade that is high enough.

If you are working on a material that is about 1-2 mil range then it is the 30 degrees blade that you should be utilizing. If the materials that you are working on are 2 mil up to around 5 or 6 mil then the best option that you can have are the 45 degree blades. For films are thicker than 6 mil then make sure that you will be using the 60 degree blades. Working on particular blade angle is what you are able to see with some film brands. The 45 degrees angled blades are also great especially if you switch a lot between 2 mil cast films and 3-4 mil calendered films. A good all-purpose blade for everyday use is what you are able to get form this one.

Once you have already chosen the blade then you will need to make manual adjustments on it. You will need to see to it that you will have a blade that will protrude from the blade holder juts the right way. You need to avoid exposing too much of the blade. A blade that is exposed about of the thickness of a credit card is what you will need to have. Once you have done the adjustment of the blade then you will now need to adjust the pressure. What you can do though is to opt for the default settings recommended by the cutter manufacturer and start adjusting from there.
Learning The Secrets About
Doing The Right Way

Similar Posts